Lukas Matena
6c223c2f84
Fixed cooling time calculation, removed unnecessary diagonal moves, fixed 'stringing' on start and end of narrower wipe tower layers
2018-03-05 16:51:31 +01:00
Lukas Matena
5ca0a2f37d
Parametrized toolchanges, experiments with sparse wipe tower, etc
2018-02-21 13:07:32 +01:00
Lukas Matena
4583d62edd
Merge branch 'master' into wipe_tower_improvements
2017-12-21 13:47:33 +01:00
Lukas Matena
c34fd10e23
Wipe tower rotation around center point
2017-12-05 11:25:38 +01:00
bubnikv
16bd3fc624
Fixed an extruder ordering bug on the 1st layer wipe tower.
...
This is a regression after introducing the extruder priming areas
at the edge of the print bed.
2017-12-03 09:43:00 +01:00
Lukas Matena
2921302fe9
GUI integration of rotation angle setting
2017-11-30 12:08:22 +01:00
bubnikv
3813402aa3
Merge branch 'master' into wipe_tower_improvements
2017-11-30 10:33:52 +01:00
Lukas Matena
0e9e487930
First implementation of wipe tower rotation
2017-11-28 17:32:11 +01:00
bubnikv
708f416c84
PlaceholderParser extended with {if}/{elsif}{else} blocks and
...
+ - * / == != <> numeric expressions.
2017-11-26 09:59:14 +01:00
bubnikv
b08d6f1969
The last priming area is shortened and the excess wipe is moved
...
into the wipe tower if there is enough space inside the wipe tower.
2017-09-12 15:55:38 +02:00
bubnikv
b610866d77
Implemented priming of all the filaments of the Prusa Multi Material.
2017-09-01 17:30:18 +02:00
bubnikv
89dcd3e8b1
Implemented raft support for the wipe tower
...
https://github.com/prusa3d/Slic3r/issues/324
Implemented a correct layer height preview for the wipe tower layers,
if the wipe tower layer height is not constant due to the application
of raft.
2017-06-08 16:58:29 +02:00
bubnikv
2178180a19
Wipe tower: Wipe less than usual amount of material if the wipe
...
is followed by the final sparse zig-zag tower section.
2017-05-30 10:51:38 +02:00
bubnikv
e000b22578
Implemented wipe tower print path preview.
2017-05-25 22:27:53 +02:00
bubnikv
70db88dd90
Improved retract handling on bowden extruders:
...
Separated deretract speed from a retract speed,
allowed a partial retract before wipe.
2017-05-19 19:24:21 +02:00
bubnikv
81701b400c
Prusa Multi Material: Improved path planning when jumping to the wipe tower.
2017-05-18 16:53:19 +02:00
bubnikv
7b6c9b3b3c
Fixes of the Prusa Multi Material wipe tower.
2017-05-17 16:45:37 +02:00
bubnikv
c22b6edeeb
Initial integration of the Prusa MultiMatrial Wipe Tower.
2017-05-16 13:45:28 +02:00
